View AT043TN13_4225145.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INNOLUX DISPLAY CORPORATION LCD MODULE S P E C I F I C AT I O N
Customer: Model Name: SPEC NO.: Date: Version: AT043TN13 V.10 A043-13-TT-101 2006/08/02 02
Preliminary Specification Final Specification
For Customer 's Acceptance Approved by Comment
Approved by
Review ed by
Prepared by
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
Contents
1. 2. General Specifications ......................................................................................................... 1 Pin Assignment .................................................................................................................... 2 2.1. TFT LCD Panel Driving Section...................................................................................... 2 2.2. Backlight Unit Section..................................................................................................... 4 3. Operation Specifications ...................................................................................................... 5 3.1. Absolute Maximum Rating.............................................................................................. 5 3.1.1. Typical Operation Conditions.................................................................................. 6 3.1.2. Current Consumption ............................................................................................. 7 3.1.3. Backlight Driving Conditions ................................................................................... 7 3.2. Power Sequence ............................................................................................................ 8 3.3. Timing Characteristics .................................................................................................... 9 3.3.1. Timing Conditions ................................................................................................... 9 3.3.2. Timing Diagram .................................................................................................... 11 4. Touch Screen Panel Specifications .................................................................................... 13 4.1. Electrical Characteristics .............................................................................................. 13 4.2. Mechanical & Reliability Characteristics ....................................................................... 13 4.3. Touch Screen Panel Block............................................................................................ 14 4.4. Touch Screen Panel Pin Definition ............................................................................... 14 5. 6. 7. Optical Specifications......................................................................................................... 15 Reliability Test Items .......................................................................................................... 19 General Precautions .......................................................................................................... 20 7.1. Safety ........................................................................................................................... 20 7.2. Handling ....................................................................................................................... 20 7.3. Static Electricity ............................................................................................................ 20 7.4. Storage ......................................................................................................................... 20 7.5. Cleaning ....................................................................................................................... 20 8. 9. Mechanical Drawing........................................................................................................... 21 Package Drawing............................................................................................................... 22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 1. General Specifications
No. 1 2 3 4 5 6 7 8 9 10 11 12 13 LCD size Driver element Resolution Display mode Dot pitch Active area Module size Surface treatment Color arrangement Interface Backlight Power consumption Panel Power consumption Weight Item
SPEC NO.: A043-13-TT-101 PAGE: 1/22
Specification 4.3 inch(Diagonal) a-Si TFT active matrix 480X3(RGB)X272 Normally White, Transmissive 0.066(W)X0.198(H) mm 95.04(W)X53.856(H) mm 105.5(W)X67.2(H)X4.95(D) mm Anti-Glare RGB-stripe Digital TBD TBD TBD
Remark
Note 1
Note 1: Refer to Mechanical Drawing.
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 2. Pin Assignment
2.1. TFT LCD Panel Driving Section
SPEC NO.: A043-13-TT-101 PAGE: 2/22
Pin No. 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Symbol GND GND VDD VDD R0 R1 R2 R3 R4 R5 R6 R7 G0 G1 G2 G3 G4 G5 G6 G7
I/O P P P P I I I I I I I I I I I I I I I I Power ground Power ground Power supply Power supply Red data (LSB) Red data Red data Red data Red data Red data Red data Red data (MSB)
Function
Remark
Green data (LSB) Green data Green data Green data Green data Green data Green data Green data (MSB)
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 B0 B1 B2 B3 B4 B5 B6 B7 GND PCLK DISP HSYNC VSYNC DE AVDD AVDD NC NC GND GND I I I I I I I I P P I I I I P P P P Blue data (LSB) Blue data Blue data Blue data Blue data Blue data Blue data Blue data (MSB) Power ground Pixel clock Display on/off Horizontal Sync Signal Vertical Sync Signal Data Enable Power supply (+5V) Power supply (+5V) No connection No connection Power ground Power ground
SPEC NO.: A043-13-TT-101 PAGE: 3/22
I: input, O: output, P: Power
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
2.2. Backlight Unit Section
SPEC NO.: A043-13-TT-101 PAGE: 4/22
Pin No. 1 2 3 4
Symbol VLED 1VLED 2VLED 2+ VLED 1+
I/O P P P P
Function Ground (cathode) Ground (cathode) LED Input terminal (anode) LED Input terminal (anode)
Remark
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 3. Operation Specifications
3.1. Absolute Maximum Rating
SPEC NO.: A043-13-TT-101 PAGE: 5/22
(GND=AVSS=0V, Note 1) Values Item Symbol Min. VDD Power voltage AVDD Input signal voltage Logic input -0.3 -0.3 (-20) (-30) 6.0 VDD+0.3 (70) (80) V V -0.3 6.0 Max. V Unit Remark
Operation Temperature TOP Storage Temperature TST
Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times. Should a module be used with any of the absolute maximum ratings exceeded, the characteristics of the module may not be recovered, or in an extreme case, the module may be permanently destroyed.
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
3.1.1. Typical Operation Conditions
SPEC NO.: A043-13-TT-101 PAGE: 6/22
(GND=AVSS=0V, Note 1) Values Item Symbol Min. 2.3 VDD Power voltage AVDD Input logic high voltage Input logic low voltage VIH VIL 3.1 4.8 0.7VDD 0 3.3 5.0 3.5 5.2 VDD 0.3VDD V V V V Typ. 2.5 Max. 2.7 V Note 2 Unit Remark
Note 1: Be sure to apply VDD and VGL to the LCD first, and then apply VGH. Note 2: You should choose only one from the typical values of VDD.
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
3.1.2. Current Consumption (GND=AVSS=0V) Values Item Symbol Min. IDD Current for Driver IAVDD 3.1.3. TBD TBD Typ. TBD Max. TBD
SPEC NO.: A043-13-TT-101 PAGE: 7/22
Unit
Remark
mA mA
VDD =2.5V AVDD =5.0V
Backlight Driving Conditions Values
Item
Symbol Min. Typ. 19.8 (16) Max. 21.0 V
Unit
Remark
LED voltage LED current LED life time
VL IL -
-
Note 2 Note 2 Note 1
mA Hr
20,000 -
Note 1: The "LED life time" is defined as the module brightness decrease to 50% original brightness that the ambient temperature is 25 and IL =16mA. Note 2: The LED driving condition is defined for each LED module (6 LED Serial).
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
3.2. Power Sequence
SPEC NO.: A043-13-TT-101 PAGE: 8/22
To prevent a latch-up or DC operation of the LCD module, the power on/off sequence should be as the diagram below.
Symbol T1 T2 T3 T4
Specification 0T110 msec 0T2100 msec 0T350 msec 0T410 msec
Symbol T5 T6 T7 T8
Specification 0T5160 msec 160 msecT6 160 msecT7 1 msecT8
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
3.3. Timing Characteristics
3.3.1. Timing Conditions
SPEC NO.: A043-13-TT-101 PAGE: 9/22
(TA = 25, VDD = 2.3V~3.5V, GND = 0V) Values Item Symbol Min. Clock cycle Hsync cycle Vsync cycle Horizontal signal Horizontal display period Horizontal Front porch Horizontal Pulse width Horizontal Back porch Vertical cycle Vertical display period Vertical Front porch Vertical Pulse width Vertical Back porch DISP Setup Time DISP Hold Time Clock Period Clock Pulse High Period Clock Pulse Low Period Hsync Setup Time Hsync Hold Time 1/tC 1/fH 1/fV th thd thf thp thb tv tvd tvf tvp tvb tdiss tdish 2 2 2 2 2 2 10 10 Typ. 9.00 17.14 59.94 525 480 41 286 272 2 10 2 Max. 15 MHz KHz Hz CLK CLK CLK CLK CLK H H H H H ns ns ns ns ns ns ns Note 2 Note 2 Note 2 Note 1 Unit Remark
PW CLK 66.7 PWH PWL ths thh 26.7 26.7 10 10
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
Data Setup Time Data Hold Time DE Setup Time DE Hold Time Vsync Setup Time Vsync Hold Time tds tdh tdes tdeh tvhs tvhh 10 10 10 10 10 10 -
SPEC NO.: A043-13-TT-101 PAGE: 10/22
ns ns ns ns ns ns
Note 1: thd=480CLK, thf= 2CLK, thp= 41CLK, thb= 2CLK 525CLK=480CLK + 2CLK + 41CLK + 2CLK Note 2: thf+ thp+ thb44 CLK
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
3.3.2. Timing Diagram
SPEC NO.: A043-13-TT-101 PAGE: 11/22
Vsync
tV
tVp
tVb
tVd
tVf
Hsync DE
Hsync
DE
Dn7Dn0
invalid
1st line
2nd line
3rd line
4th line
5th line
last line
invalid
th
Hsync
1/tc thp
CLK
thb
thd
thf
DE
Dn7Dn0
invalid 1st 2nd pixel pixel last pixel
invalid
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
SPEC NO.: A043-13-TT-101 PAGE: 12/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 4. Touch Screen Panel Specifications 4.1. Electrical Characteristics
Value Item Min. Linearity Terminal Resistance Insulation resistance Voltage Chattering Transparency -1.5 100 100 25 79 Typ. 5 Max. 1.5 900 900 7 10 % M V ms % Unit
SPEC NO.: A043-13-TT-101 PAGE: 13/22
Remark
Analog X and Y directions X(Film side) Y(Glass side) DC 25V DC 100k pull-up JIS K7105
Note: Do not operate it with a thing except a polyacetal pen (tip R0.8mm or less) or a finger, especially those with hard or sharp tips such as a ball point pen or a mechanical pencil.
4.2.
Mechanical & Reliability Characteristics
Value
Item Min. Activation force Durability-surface scratching Durability-surface pitting Surface hardness 80 Write 100,000 1,000,000 3 Typ. Max. -
Unit
Remark
g characters touches H
Note 1 Note 2 Note 3 JIS K5400
Note 1: Stylus pen input: R0.8mm polyacetal pen or finger. Note 2: Measurement for surface area. -Scratch 100,000 times straight line on the film with a stylus change every 20,000 The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
SPEC NO.: A043-13-TT-101 PAGE: 14/22
times. -Force: 250gf. -Speed: 60mm/sec. -Stylus: R0.8 polyacetal tip. Note 3: Pit 1,000,000 times on the film with a R0.8 silicon rubber. -Force: 250gf. -Speed: 2times/sec.
4.3.
Touch Screen Panel Block
Top View
4.4.
Pin No. 1 2 3 4
Touch Screen Panel Pin Definition
Symbol Y2 X2 Y1 X1 I/O Top Left Function Top electrode - differential analog Left electrode - differential analog Remark
Bottom Bottom electrode - differential analog Right Right electrode - differential analog
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 5. Optical Specifications
SPEC NO.: A043-13-TT-101 PAGE: 15/22
Values Item Symbol Condition Min. L Viewing angle (CR 10) R T B TON Response time TOFF Contrast ratio CR WX Color chromaticity WY L1 Luminance L2 Luminance uniformity YU (300) 70 (350) 75 cd/m % Normal ==0 (0.28) (0.33) (0.38) (400) (0.26) (15) (500) (0.31) (30) (0.36) msec Note 3 Note 4 Note 2 Note 5 Note 6 Note 6 (230) (280) cd/m
(With touch screen)
Unit Typ. (70) (70) (50) (70) (10) Max. degree
Remark
=180(9 o'clock) (60) =0(3 o'clock) (60)
Note 1
=90(12 o'clock) (40) =270(6 o'clock) (60) -
(20) msec Note 3
Note 6
(Without touch screen)
Note 7
Test Conditions: 1. VDD=3.3V, IL=16mA (Backlight current), the ambient temperature is 25. 2. The test systems refer to Note 2.
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
Note 1: Definition of viewing angle range Normal line ==0
SPEC NO.: A043-13-TT-101 PAGE: 16/22
=90 12 o'clock direction
L B
R T
=180 Active Area
=0
=270 6 o'clock direction Fig. 4-1 Definition of viewing angle Note 2: Definition of optical measurement system. The optical characteristics should be measured in dark room. After 30 minutes operation, the optical properties are measured at the center point of the LCD screen. (Response time is measured by Photo detector TOPCON BM-7, other items are measured by BM-5A/Field of view: 1 /Height: 500mm.) Photo detector Normal line ==0 =90 12 o'clock direction 500mm
=180 Active Area
=0
=270 6 o'clock direction Fig. 4-2 Optical measurement system setup The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
SPEC NO.: A043-13-TT-101 PAGE: 17/22
Note 3: Definition of Response time The response time is defined as the LCD optical switching time interval between "White" state and "Black" state. Rise time (TON) is the time between photo detector output intensity changed from 90% to 10%. And fall time (TOFF) is the time between photo detector output intensity changed from 10% to 90%. White (TFT OFF) Photo detector output (Relative value) 100% 90% Black (TFT ON) White (TFT OFF)
10% 0% TON TOFF
Fig. 4-3 Definition of response time
Note 4: Definition of contrast ratio
Contrast ratio (CR) = Luminance measured when LCD on the " White" state Luminance measured when LCD on the " Black" state
Note 5: Definition of color chromaticity (CIE1931) Color coordinates measured at center point of LCD. Note 6: All input terminals LCD panel must be ground while measuring the center area of the panel.
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX
SPEC NO.: A043-13-TT-101 PAGE: 18/22
Note 7: Definition of Luminance Uniformity Active area is divided into 9 measuring areas (Refer to Fig. 4-4 ).Every measuring point is placed at the center of each measuring area.
Luminance Uniformity (Yu) =
L-------Active area length
B min B max
W----- Active area width
L W/6 L/6 L/3 L/3
W W/3
Fig. 4-4 Definition of measuring points Bmax: The measured maximum luminance of all measurement position. Bmin: The measured minimum luminance of all measurement position. The copyright belongs to InnoLux. Any unauthorized use is prohibited.
W/3
INNOLUX 6. Reliability Test Items
(Note3) Item High Temperature Storage Low Temperature Storage High Temperature Operation Low Temperature Operation Operate at High Temperature and Humidity Thermal Shock Ta = (80) Ta = (-30) Ts = (70) Ta = (-20) +40, 90%RH Test Conditions
SPEC NO.: A043-13-TT-101 PAGE: 19/22
Remark Note 1 Note 1 Note 2 Note 1
240 hrs 240hrs 240hrs 240hrs 240 hrs
-30/30 min ~ +80/30 min for a total 100 cycles, Start with cold temperature and end with high temperature Frequency range:10~55Hz Stroke:1.5mm Sweep:10Hz~55Hz~10Hz 2 hours for each direction of X. Y. Z. (6 hours for total) 100G 6ms,X, Y, Z 3 times for each direction Random Vibration : 0.015G*G/Hz from 5-200HZ, -6dB/Octave from 200-500HZ 2 hours for each direction of X. Y. Z. (6 hours for total) Height:60 cm 1 corner, 3 edges, 6 surfaces 2KV, Human Body Mode, 100pF/1500
Vibration Test
Mechanical Shock
Package Vibration Test
Package Drop Test Electro Static Discharge
Note 1: Ta is the ambient temperature of samples. Note 2: Ts is the temperature of panel's surface. Note 3: In the standard condition, there shall be no practical problem that may affect the display function.
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 7. General Precautions
7.1. Safety
SPEC NO.: A043-13-TT-101 PAGE: 20/22
Liquid crystal is poisonous. Do not put it in your mouth. If liquid crystal touches your skin or clothes, wash it off immediately by using soap and water.
7.2.
Handling
1. The LCD panel is plate glass. Do not subject the panel to mechanical shock or to excessive force on its surface. 2. The polarizer attached to the display is easily damaged. Please handle it carefully to avoid scratch or other damages. 3. To avoid contamination on the display surface, do not touch the module surface with bare hands. 4. Keep a space so that the LCD panels do not touch other components. 5. Put cover board such as acrylic board on the surface of LCD panel to protect panel from damages. 6. Transparent electrodes may be disconnected if you use the LCD panel under environmental conditions where the condensation of dew occurs. 7. Do not leave module in direct sunlight to avoid malfunction of the ICs.
7.3.
Static Electricity
1. Be sure to ground module before turning on power or operating module. 2. Do not apply voltage which exceeds the absolute maximum rating value.
7.4.
Storage
1. Store the module in a dark room where must keep at 2510 and 65%RH or less. 2. Do not store the module in surroundings containing organic solvent or corrosive
gas. 3. Store the module in an anti-electrostatic container or bag.
7.5.
Cleaning
1. Do not wipe the polarizer with dry cloth. It might cause scratch. 2. Only use a soft sloth with IPA to wipe the polarizer, other chemicals might permanent damage to the polarizer.
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 8. Mechanical Drawing
SPEC NO.: A043-13-TT-101 PAGE: 21/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.
INNOLUX 9. Package Drawing
TBD
SPEC NO.: A043-13-TT-101 PAGE: 22/22
The copyright belongs to InnoLux. Any unauthorized use is prohibited.

▲Up To Search▲

Price & Availability of AT043TN13

	To Download AT043TN13 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .